SANA SEDEO

Scope of application

The sedeo 150 is especially designed for the training of disabled persons. It closes a gap in our range of high-end bicycle and couch ergometers. This special device is based on the proven functionality of our ergometers. A pneumatic spring enables the load unit's easy adjustment to the individual height of every patient. A stable base guarantees maximum stability.
The ergonomic handcranks enable a good power transmission during the rotation. The especially designed seat is guided on a rail. On this rail, it can be moved very easily to the best exercising position and fixed. The seat's height and the slope of its back can be adjusted infinitely to enable the patient's optimum position for a good power transmission.

 

Details

The ergometer can be adapted in a few seconds to wheelchair users. The seat is equipped with a handle, by which it can be lifted out of the guide. It then can be turned by up to 90 degrees to the left or right. Now the wheelchair user can move into the correct position and hold the brakes. The load unit's height is adjusted using the pneumatic spring. This construction saves much time and energy on the device's adaptation.

 

The measuring head faces the patient and its big display continuously shows all important training data and a graph indicating the current performance and heart rate. The load unit runs independently of revolutions per minute, in a range of 20 to 800 watts and an accuracy of 3%. The novel, nearly noiseless belt drive gives the patient a smooth spinning sensation. The ergometer is designed for ergometry recordings. For this purpose, five user-defined ergometry programs are available. A special cardiovascular training program for disabled patients is an option. This is especially significant as only limited means for efficient cardiovascular training are available to disabled persons.

A "pulse-steady-state" program opens up the possibility of accurate performance control. Theheart rate is determined using an integrated receiver and a "Polar belt". (See training using the pulse-steady-state program.) For special applications, the ergometer can be delivered with blood pressure measuring equipment (sana sedeo 250F). With this equipment, the blood pressure is measured on the leg artery above the ankle.

 

Special training using the "pulse-steady-state" program

Accurate load application is a prerequisite for an effective training, especially for high-risk patients. It is mainly based on the patient's general condition and training status. Using the "pulse-steady-state" program, the sana sedeo handcrank ergometer perfectly meets all these requirements for a successful training. Starting from an initial load level, the load is increased automatically until the preset training pulse rate is reached. A computer integrated in the measuring head then controls the load to keep the pulse rate constant over the required period of time. The patient wears a pulse monitor (Polar belt), which transmits the pulse rate to the receiver by wireless.

 

Advantages

  • high load precision
  • Pneumatic height adjustment spring for the load unit
  • measurements controllable using a PC program or an ECG/ergo-spiro unit via RS-232 
  • Stable steel/aluminium construction
  • pleasant pedalling feeling
  • almost noiseless, even at high speed
  • elegant, dirt-repellent casing
  • low maintenance
  • precise blood pressure measuring
  • Wheelchair docking
 

Technical details


TypDescription
Power supply 230 VAC 50–60 Hz, 115 VAC 50– 60 Hz
Electric inputs/outputs RS-232 (galvanically isolated)
Base dimensions 40 x 108 cm /57 kg
Standard EC directive MDD 93/42/EEC, DIN VDE 0750-238
Braking principle Computer-controlled brakes with permanent measurement of torque. The braking performance is independent of revolutions per minute.
Power range 1 until 999 Watt
Load range 20 until 999 watts
Range of revolutions 30 to 130 per min using special handcranks
Load precision in accordance with DIN VDE 0750-238 (in revolution-independent region)
Displays LCD with graphic capability, 320 x 240 pixels, CCFT background lighting
Pulse measurement Using a blood pressure unit or an optional Polar pulse monitoring system; pulse rate 35–240
Wheelchair docking The seat can be turned to the side to make the wheelchair holders accessible.
Blood pressure measurement (option) Indirect with special modified R-R measurement system, computer evaluation and distortion-free suppression of interferences during ergometry. Automatic pressure release by 3 mmHg/pulse; quick pressure release at the average of high amplitudes. Measuring range 40–300 mmHg. Measurement site with special cuff directly above the ankle. The height difference between the heart and the measurement site must be considered.
Long-term accuracy Torque equalisation at any time with weight
 

Downloads

User's manual

Leaflet

german english



 

SERVICES

WITH THE TEAM VIEWER CAN ONE REMOTE MAINTENANCE EASYLY PERFORM.

Just download and start.


Download